特点：

• 本机型采用欧美设计标准理念，电机、导轨、同步带等关键部件采用瑞士、美国、日本等进口零件，性能稳定，故障率极低，使用寿命更长
  
• 采用夹臂式自动送料，精准送料可达到前后两版的共边切割，极大提高了材料利用率
  
• 配备多种切割刀具和笔，可满足各类不同材料的切割要求。可实现高速、智能、精密的切割、冲孔、绘图等工艺需求，充分满足客户的个性化切割生产
  
• 刀座配备检测台面系统，让刀头与台面保持一定距离，可以使切割效果更佳，台面更耐用，刀片使用寿命更长
  
• 全机装有红外感应停机系统，卡料时急停，物体碰撞时急停，操作更安全
  
• 一体式焊接式机身，设备运行更稳定
  
• 安装气泵静音器，使工作环境更好
  
• 笔画模块：可以在材料上绘制各种工艺图形，充分满足客户个性化生产需求
  
• 双头切割：提高加工效率，经济***化使用设备
  

选配：

• 震动尖刀：通过伺服马达驱动刀片上下高频震动切断材料，适合切割中等密度的材料，搭配多种刀片可以切割绝大部分柔性材料
  
• 震动轮刀：通过伺服马达驱动刀高速旋转切割材料，切割效果可以做到圆滑，无毛边，可以配备8角刀片或10角刀片，适合切割各种编制材料
  
• 气动尖刀：通过气压高速震动切割材料，特别适合各种偏硬材料，小多层柔性材料的切割
  
• V型刀口冲模：保证在震动轮刀切割的时候，有效的冲出剪口，可以避免震动轮刀出现过切问题
  

Features:

• This model adopts European and American design standards, and key components such as motors, guide rails, and synchronous belts are imported from Switzerland, the United States, Japan, and other countries. Its performance is stable, the failure rate is extremely low, and its service life is longer
  
• Adopting a clamping arm type automatic feeding system, precise feeding can achieve edge cutting between the front and rear versions, greatly improving material utilization rate
  
• Equipped with various cutting tools and pens, it can meet the cutting requirements of various materials. Capable of achieving high-speed, intelligent, and precise cutting, punching, drawing and other process requirements, fully meeting customers' personalized cutting production needs
  
• The blade holder is equipped with a detection table system to maintain a certain distance between the blade and the table, which can improve the cutting effect, make the table more durable, and prolong the service life of the blade
  
• The entire machine is equipped with an infrared induction shutdown system, which provides an emergency stop when materials are stuck or when objects collide, making operation safer
  
• Integrated welded body for more stable equipment operation
  
• Install an air pump mute to improve the working environment
  
• Stroke module: can draw various process graphics on materials, fully meeting customers' personalized production needs
  
• Double head cutting: improve processing efficiency and maximize economic use of equipment
  
  

Optional:

• Vibration Sharp Knife: Driven by a servo motor, the blade is vibrated up and down at high frequencies to cut materials, suitable for cutting medium density materials. With multiple blades, it can cut the vast majority of flexible materials
  
• Vibration wheel cutter: Driven by a servo motor, the cutter rotates at high speed to cut materials. The cutting effect can be smooth, without burrs, and can be equipped with 8-angle or 10-angle blades, suitable for cutting various woven materials
  
• Pneumatic sharp knife: cuts materials through high-speed vibration under air pressure, especially suitable for cutting various hard materials and small multi-layer flexible materials
  
• V-shaped blade punching die: ensures effective punching of the cutting edge during the cutting process of the vibrating wheel cutter, which can avoid overcutting problems with the vibrating wheel cutter