适用范围：

1. 适用鞋尺寸（含压低模）：长130~400mm/宽150mm以下/高200mm以下/鞋边高65~80mm
   
2. 适用于龙船底、墙式包底运动及休闲鞋的餐底压着
   

机器功能及特点：

1. 四站旋转式设计，可减少作业等待时间，提升产能
   
2. 具备快速定位功能，使机器能快速旋转至指定位置
   
3. 十组记忆功能，方便操作人员对各种大小鞋型设定后进行开存档
   
4. 电脑化PLC控制器搭配人机互动界面屏幕，采用双手启动，更加安全快捷
   
5. 直觉式人机界面设计，使操作人员方便掌握机器状态及设定
   
6. 具备故障报警功能，使操作人员能立即发现问题并快速排除问题
   
7. 上升油压缸使用预充阀补充油量，可使操作上升动作加速，节省操作时间
   
8. 前后束紧机构后退时，可控制其后退距离，更换鞋子大小方便
   
9. 两支压杆可做偏摆动作，方便鞋楦的取放；免除旧式固定式压杆操作不便的问题
   
10. 两边各有8-22个橡胶发泡体压块，每个压块均由独立油压缸推动，可随大小不同的鞋型做调整
    
11. 每个侧压压块都配备装置挡销，可根据情况选择
    
12. 鞋头束紧压块有多种型式供选择，对各种尺码的鞋类都能达到良好的压着效果
    
13. 采用全油压系统设计，压低、压力及压前后可一次完成，也可选择个别完成
    
14. 两支压杆高低调整采用油压自动平衡结构，对于鞋楦高低变化，长弘或半长统鞋均免调整，并确保两支压杆的压力平均，使鞋底压着力量更均匀
    

Scope of application:

1. Applicable shoe sizes (including compression mold): length 130-400mm/width below 150mm/height below 200mm/shoe edge height 65-80mm
   
2. Suitable for dragon boat bottom, wall bottom sports and casual shoes with sole pressing
   

Machine functions and features:

1. Four station rotating design can reduce waiting time for operations and increase production capacity
   
2. Equipped with fast positioning function, the machine can quickly rotate to the designated position
   
3. Ten sets of memory functions, convenient for operators to open and save files after setting various shoe sizes
   
4. Computerized PLC controller paired with human-machine interactive interface screen, using dual hand start for safer and faster operation
   
5. Intuitive human-machine interface design enables operators to easily grasp machine status and settings
   
6. Equipped with fault alarm function, allowing operators to immediately detect and quickly troubleshoot problems
   
7. The use of a pre charging valve to replenish oil in the rising hydraulic cylinder can accelerate the upward movement and save operation time
   
8. When the front and rear fastening mechanism retracts, its retraction distance can be controlled, making it easy to change shoe sizes
   
9. Two pressure rods can perform a swinging motion, making it convenient to take and place shoe lasts; Eliminate the problem of inconvenient operation of old fixed pressure rods
   
10. There are 8-22 rubber foam blocks on each side, each of which is driven by an independent hydraulic cylinder and can be adjusted according to different shoe sizes
    
11. Each side pressure block is equipped with a device stop pin, which can be selected according to the situation
    
12. There are various types of toe binding pressure blocks to choose from, which can achieve good pressing effect on shoes of all sizes
    
13. Adopting a fully hydraulic system design, low pressure, pressure, and pre - and post pressure can be completed in one go, or individual completion can be selected
    
14. The height adjustment of the two pressure rods adopts an automatic hydraulic balance structure. For changes in shoe last height, both long and semi long shoes do not need to be adjusted, and ensure that the pressure of the two pressure rods is evenly distributed, making the pressure on the sole more uniform