机器特点：

1. 适用于车运动鞋、休闲鞋的侧缝锁式边线
   
2. 鞋内自动剪线，省线10%-15%，全自动剪线底线机，可以直径将面线在鞋内部剪断，面线、底线可一样长。产量600-1000双左右的小线，可节省勾线1人，产量2000双左右的大线，可节省勾线2人
   
3. 自动拉面线与底线，***针线头会自动拉线到鞋内部，自动剪线后自动拉底线节省时间，提升效率
   
4. 不锈钢握把，永不生锈
   
5. 高强度耐磨机头，内孔不易磨损
   
6. 本机勾线器传动部位采取齿轮传动，耐磨耐用，不需要更换链条
   
7. 本机勾线器、梭子壳、承环等采用日本佐文产品
   
8. 本机机头可前后调节，更换大/小针时，不需要在牛角摆臂处增、减垫片
   
9. 精准刹车，驱动电机采用伺服电机，能够精准刹车不会产生惯性，不会导致多跑一针
   
10. 自动底线报警，底线快用完时自动报警，避免车一段没有底线而耽误时间，自带故障语音报警
    
11. 集成电控软体系统，采用的集成电控软件系统是一个任务由一个控制系统统一指挥，是***稳定的数控方案
    
12. 可选装远程服务系统和联接管理软件（ERP、0EM）自动感应后在PLC内文字显示各类故障问题，可快速沟通后调整，无需人工判断
    

Machine features:

1. Side seam locking edge suitable for car sports shoes and casual shoes
   
2. Automatic thread cutting inside the shoe, saving 10% -15% thread. The fully automatic thread cutting machine can cut the upper thread inside the shoe with the same diameter, and the upper thread and lower thread can be the same length. A small thread with a production capacity of around 600-1000 pairs can save 1 person for hooking, while a large thread with a production capacity of around 2000 pairs can save 2 people for hooking
   
3. Automatically pull the thread and bobbin thread. The first stitch of thread will be pulled to the inside of the shoe automatically. After automatic thread trimming, the bobbin thread will be pulled automatically to save time and improve efficiency
   
4. Stainless steel grip, never rusting
   
5. High strength wear-resistant machine head, with inner holes that are not easily worn out
   
6. The transmission part of this machine's wire hook adopts gear transmission, which is wear-resistant and durable, and does not require chain replacement
   
7. The wire hook, shuttle shell, and support ring of this machine are made of Japanese products from Sawan
   
8. The machine head can be adjusted back and forth. When replacing the large/small needle, it is not necessary to add or remove shims at the horn arm
   
9. Precise braking, driven by servo motors, can achieve precise braking without generating inertia or causing an extra needle to run
   
10. Automatic bottom line alarm, automatic alarm when the bottom line is almost used up, to avoid wasting time due to a lack of bottom line in a section of the car, with built-in fault voice alarm
    
11. Integrated electronic control software system, using an integrated electronic control software system where each task is commanded by a control system, is the most stable numerical control solution
    
12. Optional remote service system and connection management software (ERP, 0EM) can display various fault problems in PLC after automatic induction, which can be adjusted after rapid communication without manual judgment